---
title: "IT contract liability caps and PI: will your cap hold?"
description: "The liability cap in an IT contract only protects you if it is reasonable, clearly drafted and not undone by carve outs. How it should fit your PI limit."
url: "https://www.hammondpi.com/insights/it-contract-liability-caps-pi/"
updated: "2026-11-20T06:10:05.461Z"
---

[Home](https://www.hammondpi.com/index.md) / [Insights](https://www.hammondpi.com/insights.md) / Liability caps in IT contracts: will yours hold, and what does PI do?

Insights for IT consultants

# Liability caps in IT contracts: will yours hold, and what does PI do?

The liability cap is the clause every IT supplier relies on and few test. Whether it holds depends on a statute, on the drafting and on what sits outside it. Each of those also bears on how your PI limit should be set.

Why it mattersReasonableness testThe draftingOutside the capCap and policyWhat to do

Guidance only. Cover depends on your own policy wording; speak to us about your position.

## Why the cap is the most important clause you sign

When an IT project fails, the client’s loss is rarely limited to the fees. In [Soteria Insurance v IBM United Kingdom \[2022\] EWCA Civ 440](https://caselaw.nationalarchives.gov.uk/ewca/civ/2022/440) the customer’s wasted expenditure was found to be £122.6 million. In [Drax Energy Solutions v Wipro \[2023\] EWHC 1342 (TCC)](https://caselaw.nationalarchives.gov.uk/ewhc/tcc/2023/1342) the customer claimed about £31 million on a contract where the charges paid in the first twelve months were under £8 million.

The cap is what turns an open ended risk into one a business can carry and an insurer can underwrite. In [Topalsson v Rolls-Royce Motor Cars \[2023\] EWHC 1765 (TCC)](https://caselaw.nationalarchives.gov.uk/ewhc/tcc/2023/1765) damages of over €7 million were reduced to the contract’s €5 million cap. But a cap protects you only if it survives challenge, says what you think it says, and is not hollowed out by what sits outside it.

## The reasonableness test on your standard terms

If a client deals on your written standard terms, a clause limiting your liability for breach must satisfy the requirement of reasonableness ([Unfair Contract Terms Act 1977, section 3](https://www.legislation.gov.uk/ukpga/1977/50/section/3)). In judging a cap, the court looks at the resources you could expect to have to meet the liability and how far it was open to you to cover yourself by insurance. It is for you to show the clause is reasonable ([section 11](https://www.legislation.gov.uk/ukpga/1977/50/section/11)).

[Kingsway Hall Hotel v Red Sky IT (Hounslow) \[2010\] EWHC 965 (TCC)](https://caselaw.nationalarchives.gov.uk/ewhc/tcc/2010/965) shows the test at work. The supplier’s standard terms capped direct loss at four times the price, agreed as £70,463, and excluded loss of profits. The hotel had relied on the supplier’s recommendation of an off the shelf system, only the price had been negotiated and the parties did not have equal bargaining power. The judge held that the terms did not meet the reasonableness test and gave judgment for £110,997.54.

A cap that was discussed, and that bears some relation to the contract and to the insurance you carry, is usually easier to defend than a boilerplate figure nobody negotiated.

## Four drafting points the courts have decided

Even a reasonable cap does only what its words say. These four decisions each turned on a few words in a technology contract.

Court decisions on the drafting of liability caps and exclusions in technology contracts

The question

The case

What was held

One cap, or one for each claim?

[Drax v Wipro \[2023\] EWHC 1342 (TCC)](https://caselaw.nationalarchives.gov.uk/ewhc/tcc/2023/1342)

A clause limiting total liability to 150% of the charges in the preceding twelve months was a single aggregate cap for all the customer’s claims, calculated by the supplier at about £11.5 million.

What does a “negligence” carve out remove?

[Triple Point v PTT \[2021\] UKSC 29](https://caselaw.nationalarchives.gov.uk/uksc/2021/29)

The cap did not apply to liability resulting from “fraud, negligence, gross negligence or wilful misconduct”. Negligence included careless breach of the contractual duty of skill and care, so those damages fell outside the cap.

Do delay damages count towards the cap?

[Triple Point v PTT \[2021\] UKSC 29](https://caselaw.nationalarchives.gov.uk/uksc/2021/29)

On that contract’s wording, liquidated damages for delay were subject to the overall cap.

Which losses does an exclusion reach?

[Soteria v IBM \[2022\] EWCA Civ 440](https://caselaw.nationalarchives.gov.uk/ewca/civ/2022/440)

A clause excluding “loss of profit, revenue, savings” did not exclude wasted expenditure. The Court of Appeal put the net claim, after the contract’s cap, at £80,574,168.

## What usually sits outside the cap

Read the cap clause to its last line, then read the indemnities. Client paper commonly places these outside the cap:

-   indemnities for intellectual property infringement, data protection breaches and breach of confidence
-   losses “resulting from negligence”, words that can reach careless breach of contract as well as a separate claim in negligence
-   liquidated damages or service credits, where the contract says they are payable in addition to capped damages

PI is written to answer the damages the law would award. Wordings usually exclude liability assumed by contract that goes beyond that. An indemnity can remove the client’s duty to mitigate and the ordinary rules on remoteness, and an uncapped one has no ceiling at all. So the real exposure on a contract is the cap plus everything carved out of it, and some of what is carved out may not be insured.

## Reading the cap against your PI

-   **Limit against cap.** Compare your largest caps with the policy limit. Check whether the limit applies to each claim or in the aggregate, and whether defence costs sit inside it.
-   **Many contracts, one limit.** Each client has its own cap, but one faulty release can reach several clients and may be treated as one claim with one limit.
-   **Insurance is part of the test.** Because the court considers the insurance open to you, a cap set far below the cover you actually hold may be harder to justify on standard terms.
-   **Caps you accept from others.** Agreeing a sub-contractor’s or software vendor’s cap limits what insurers can recover. Some wordings restrict cover where recovery rights have been given away. [Freelancers and sub-consultants](https://www.hammondpi.com/insights/freelancers-and-sub-consultants.md)
-   **What insurers are told.** Your usual caps, how often you sign the client’s paper and any indemnity outside the cap belong in the renewal presentation. [Fair presentation explained](https://www.hammondpi.com/insights/fair-presentation.md)

## What to do before you sign

1.  Find the cap and work out the figure it produces today, not the formula. A cap tied to charges paid moves as the contract runs.
2.  Check whether it is one cap for the whole contract or one for each claim or each year, and make the clause say so.
3.  List everything outside it: indemnities, negligence, data, confidentiality and delay damages.
4.  On your own standard terms, record why the cap is reasonable for this client and this contract, and invite negotiation of it.
5.  Send us the draft. Hammond PI reads the clause against your policy wording and tells you which parts the policy is likely to follow, which it may not, and what to ask the client to change. [Contract reviews](https://www.hammondpi.com/contract-reviews.md)

## Asked to sign the client’s paper?

Send us the liability and indemnity clauses before you agree them, and we will read them against your PI wording.

[Speak to a PI specialist](https://www.hammondpi.com/contact.md)[PI for IT consultants](https://www.hammondpi.com/who-we-cover/it-consultants.md)

Related: [PI for IT consultants](https://www.hammondpi.com/who-we-cover/it-consultants.md) · [Contract reviews](https://www.hammondpi.com/contract-reviews.md) · [The clause guide](https://www.hammondpi.com/clauses.md)
