Home / Insights / What PI must a fire engineer or fire risk assessor actually hold?
Insights for fire consultants
What PI must a fire engineer or fire risk assessor actually hold?
No regulator yet sets a PI limit for fire engineers or fire risk assessors. The requirement comes from three places: your institution’s code, the register you sit on and the contracts you sign. Each asks for something different, and none says what the policy must contain.
Guidance only. Cover depends on your own policy wording; speak to us about your position.
There is no statutory minimum, and that is the difficulty
Some professions have a regulator that fixes a minimum limit and approves a minimum wording. Fire safety has neither. Government’s plan to regulate fire engineers does not mention insurance (GOV.UK, fire engineering reform), and its consultation on certifying fire risk assessors proposes no insurance requirement (MHCLG consultation).
So “compliant” has no single meaning. You have to satisfy several rule makers at once, and then make sure the policy behind the certificate would respond to the work you do.
What each rule maker asks for
| Source | What it asks for | What it leaves open |
|---|---|---|
| Institution of Fire Engineers, Code of Conduct (issued February 2026) | Members of all grades must hold adequate professional indemnity insurance, where required. They must also accept responsibility for work done by them or under their supervision. | No figure, and no definition of “adequate”. |
| Institute of Fire Safety Managers, National Fire Risk Assessors Register policy (version 28, 29 June 2026) | Every applicant must hold PI, or work exclusively within a business whose public liability insurance covers their work. Valid insurance documents stay on the registrant’s online profile, are replaced as they expire and are evidenced at each annual renewal. | No minimum amount, and no test of what the policy excludes. |
| Government backed EWS1 PI scheme (closed 30 October 2023) | Nothing new. Policies sold under the scheme continue on their original terms, for the five years the form is valid and a further 15 years. | Every EWS1 form signed outside the scheme sits on your annual policy, on whatever terms it gives external wall work. |
| Appointments, frameworks and collateral warranties | Usually a stated limit, a basis (each claim or aggregate) and a number of years for which cover must be kept up after the work ends. | Whether your policy can deliver that limit for fire safety claims at all. |
The register’s rules have teeth. Registrants who do not submit renewal documents are suspended from the due date and, after a maximum of two months, removed (policy, section 11). A lapsed certificate can become a registration problem.
What “adequate” has to mean in practice
With no figure to lean on, adequacy is judged against the work. We test it with five questions.
- Does the business description fit? Strategies, risk assessments, external wall appraisals, inspections and expert work should each be described, including services you provide only occasionally.
- Is fire safety work covered at all? A general fire safety exclusion can leave a certificate that satisfies a register and a policy that covers very little of what you do. How the exclusions differ
- Which limit applies? The printed limit may be for each claim with costs in addition. The limit for fire safety claims may be lower, in the aggregate, with defence costs inside it.
- How far back does it reach? Claims under the Defective Premises Act 1972 can be brought for 30 years where the right arose before 28 June 2022, and 15 years for later work (Limitation Act 1980, section 4B). The retroactive date has to match.
- Who is insured? Check that former partners, predecessor practices and freelancers who sign under your name fall within the policy’s definition of the insured.
Where firms get caught
- A certificate is not a policy. A register or client sees a one page confirmation. It may not show a restriction on the work you were appointed to do. The register itself tells users to verify an assessor’s insurance (NFRAR).
- Public liability standing in for PI. The register lets an assessor who works only on an employer’s own buildings rely on public liability. Take on one outside client and that is external work, which needs PI. Public liability policies commonly exclude advice given for a fee.
- A contract promise the policy cannot keep. An appointment may require a limit for each and every claim, held for years after completion. If your fire safety cover is in the aggregate, you may be in breach of the insurance clause from the day you sign, whether or not a claim is ever made.
- Scheme cover forgotten. The EWS1 scheme was open to assessors on eligibility registers managed by RICS and the IFE (GOV.UK). If you bought a scheme policy for a building, it is separate from your annual policy. Keep a list of which forms sit where.
- Cover that stops when you do. PI is written on a claims made basis. No rule here says what happens after you retire or close, but claims can keep coming. Run off cover explained
How to evidence cover without overstating it
Registers, frameworks and clients will ask you to confirm your insurance. What you send must be accurate. A statement of the headline limit, when fire safety claims have a lower aggregate limit, can mislead the person relying on it and create a second problem beside the first.
Before you sign an insurance clause or complete a supplier questionnaire, send it to us with the scope of the job. We read it against your wording and endorsements, tell you what you can properly confirm, and say where the contract asks for more than the policy gives. Contract reviews
What may change
Government has said it will legislate to make certification mandatory for fire risk assessors and to regulate the title and function of “fire engineer”. Neither set of papers sets a PI condition. A regulator with a register could add one later, as other professions’ regulators have. A competence rule for anyone appointed to assist with an assessment is already on the statute book but not yet in force (Building Safety Act 2022, section 156).
Until then the test stays the same: not whether you hold a certificate, but whether the policy behind it fits the buildings you work on.
Asked to prove your PI?
Send us the request and your schedule, and we will check what you can properly confirm before you sign.
Related: PI for fire consultants · Contract reviews · Fire safety exclusions compared